Buying guide · Updated November 2026
How to Choose a Portable Power Station
Whether it is for camping, a road trip or power outages, sizing a portable power station comes down to a little arithmetic and a few key specs.
Capacity: how much energy it stores
Capacity is listed in watt-hours (Wh). To estimate what you need, multiply each device's wattage by the hours you will run it, add them up, and leave a margin because inverters lose some energy in conversion. A rough rule: divide your total by about 0.85.
Example: a 60 W fridge for 10 hours (600 Wh) plus a 10 W light for 5 hours (50 Wh) is 650 Wh, so look for roughly 750 Wh or more.
Sizing calculator
Enter what you want to run. We add a 15% margin for inverter losses.
Output: what it can power at once
Continuous output (watts) is the most it can supply at once. Surge output covers short spikes when motors start, such as fridges, pumps or power tools. Add up the wattage of everything you will run at the same time and make sure the continuous rating is above it.
Battery chemistry: LiFePO4 vs. NMC
LiFePO4 (lithium iron phosphate) units are typically rated for many more charge cycles and are more thermally stable, but they are heavier for the same capacity. NMC units are lighter and more compact but usually rated for fewer cycles. If you will use it often, cycle life matters more than weight.
Charging options
Check how fast it recharges from a wall outlet, what solar input it accepts (maximum watts and voltage range), and whether it can charge from a car. Solar input wattage tells you how quickly panels can refill it on a good day.
Ports and features
- Pure sine wave AC outlets for sensitive electronics.
- USB-C with high wattage for laptops.
- A 12 V car-style outlet for fridges and pumps.
- Pass-through or UPS mode if you want it to back up a device during an outage.
Quick checklist
- Total Wh needed, with margin?
- Continuous and surge watts high enough?
- LiFePO4 or NMC for my usage?
- Recharge time from wall and solar?
- Weight I can actually carry?